AH Series Motion CPU
AH Motion is the advanced motion control series with dedicated motion control CPUs and shares the same modules with AH series PLCs. Through the motion control network, such as EtherCAT, AH Motion CPU can perform high-speed, high-precision machine control with the connected servo drives on the motion network
DVP-10PM
MPU points: 24
Max. I/O points: 256
Program capacity: 64k steps
Built-in hardware digital filter for counting
6 high-speed counters (O.C. 200kHz*4, differential 200kHz*2), supporting U/D, U/D Dir, A/B, 4A/B counting modes
4 differential 1MHz outputs, supporting U/D, U/D Dir, A/B output modes
Supports 1-speed (immediate stop after the mark arrives), 2-speed, zero return, MPG and single axis function
Highly accurate PWM 200kHz output, resolution 0.3%
Electronic gear function
8 high-speed captures (mark correction, frequency measurement), comparative output, mark/mask function (for bag making)
8 external interruptions for setting up rising- and falling-edge triggers, 1 timed interruption
Highly efficient command execution. LD: 0.1375µs, MOV: 2.1µs
MPU points: 10/ 14 / 16 / 24 / 32 / 60
Max. I/O points: 60
Program capacity: 4k steps
COM ports: Built-in RS-232 and RS-485 ports (available in 16-60 point models); compatible with Modbus ASCII/RTU protocol
Built-in 4 points of high-speed counters*:
DVP-EC3 Series
DVP-10MC
Built-in 12 I/O points
(8 sets of high-speed pulse inputs for interrupt function and 4 sets of high-speed outputs)
Max. 480 I/O points
Program capacity:Ladder 16k steps / Motion 1Mbyte
Built-in Ethernet, RS-232 and RS-485 communication port and standard MODBUS ASCII/RTU communication protocol
Flexible industrial network applications
(provides DeviceNet Master/Slave, CANopen Master/Slave, PROFIBUS-DP Slave and many more modules)
Provides standard CANopen communication cables, terminal resistors, distribution boxes and related accessories. Wiring is simple and easy.
Synchronously controls 4 axes in 2ms and 8 axes in 4ms
Compatible with G-Code
Supports PLCopen standard function blocks for motion control, enhancing program editing efficiency
MPU points: 20 (8DI/6DO, 4AI/2AO)
Max. I/O points: 494 (14 + 480)
Program capacity: 16k steps
COM port: Built-in RS-232, RS-485 & USB ports, compatible with ASCII/RTU protocol. Can be master or slave.
High-Speed Pulse Output: Supports 2 points (Y0, Y2) of 100kHz and 2 points (Y1, Y3) of 10kHz independent high-speed pulse output.
Built-in High-Speed Counters
Built-in Analog I/O
DVP-SX2 Series
